Blog

How To Get A Spare Tire Down Without The Tool

Then comes the next problem. It is essential to have a working spare wheel as you never know when you will need it next. Not having one is paramount to getting stuck in bad situations. Then comes the next problem. You have a spare tire but haven’t got the tool to get it down. What do you do in this case? Is it as bad as not having a tire? Well, you are in luck as there are several ways in which you can go about this read on if you want to know more as to how to lower spare tire without tool f150:

F150 Spare Tire Removal Without Tool

There are many resources as to this. But in most cases, you will find that they are quite tasking and lengthy and hard to follow. Here, we will cover the easiest way to go about this and get back on the road in no time.

You will need some tools to account for the lack of the key. Get some joint plies, small pieces of 2*4s, and a friend. The friend is there to assist you, where need be. Though in most cases, you will not need any help, and they will serve as a source of entertainment. That said, you can accomplish this task without any assistance.

Once you have what you need, you can now get under the truck. Before doing this, you must check the wheels of the car. Preferably, the vehicle should be on a flat surface as this will prevent any movement while you work on it. Safety is of the essence in this case, and failure to pay attention to detail could land you in hospital. When you are sure that the car is stable, you can settle under the vehicle. Locate the guide tube, which should be towards the back of the truck. Proceed to turn it as you pull it, and this should take place simultaneously. The guide tube will come off, and you will thus have access to the drop assembly of the spare tire. Good work!

Now move to the passenger side, without removing the checking that is holding the car in place. Work on the spare tire on the passenger side by pulling it down. Use some of the 2*4s in the space between the frame and the top of the tire. The essence of doing so is to create some space between the frame and the tire. In this way, you can work on the tire without much distraction.

As you work on the tire and you feel it coming loose, you can now try to access the key used in dropping the spare. Using the pliers, clamp down on the key. Proceed to wiggle the pliers and pull it towards the end of the car. Continue doing this until you have the key loosened. In this regard, it is essential to note that there are many tools that you could use for this process. If you wish, you could use locking pliers, and they would work just as well.

You can now use your stock spare tire tools to drop the tire. The good news is that you will not have to worry about the key so much and subsequent removals will not pose much of a hassle.

There are other options in this case. You could go to the dealer and get a new key. The downside to this is that you will spend a couple of bucks in something that you can handle by yourself. You could also use metric bolt extractor sets. When using this method, ensure that you get the right size as wrong dimensions will not ease this task. Or you could always go with the above process and get the work done in under ten minutes.

Are you interested in learning other ways through which you can get the spare tire down? Let’s get into more examples:

How Do You Get The Spare Tire Off A Ford F 150?

Can you change a tire if it went flat? Here is the easiest way to go about this:

The spare tire is below the truck bed, and you can see it suspended at this location. It lies a little to the back bumper. You should note the state of your spare tire now and then. As much as it is vital to have a spare tire, it should also be in good condition. Thus, you should watch the tire pressure monthly. And each time you check the other tires, be sure to check the spare one too. Removing the spare tire might take a lot of time in the first instances. But once you get the hang of it, you should complete the process in a matter of minutes.

And as much as heading to the mechanic will save you the hassle; it will cost you. And there is no need to rely on an expert for something which you can handle by yourself. Plus, you get to save time and money. And you end up more self-reliant. It’s all upsides when it comes to changing your tire. Now, let’s get started on the simple process that could save you if you were to get a flat:

Start by opening the hood of the car. Here, you will find the tire tool which should be above the radiator. Note that if you do not have this tool, you could always use the process outlined above.

Next, use the pointed end of the tool and direct it into the opening near the back license plate. Direct it such that it connects to the winch of the spare tire. Once it is in place, you can proceed to turn the tool clockwise. In so doing, you will lower the spare tire. From here, check the car to ensure that it is stable. You can do so by having a few blocks behind the front wheel tires. Then crawl under the back of the truck. Here, you can slip the spare carrier cable end from the center hole of the rim. You can do this by hand, and you can then pull the tire from under the car. Once you do this, you can then get started on changing the tire.

Points to Note

Not all F 150s are the same. There are the makes that came into the market towards the start of the twenty-first century with different features. These have a locking spare tire carrier. In this case, you find that you will need a spare tire key which works with the tire tool. The combo allows you to lower the tire and where you lack the key, you make do with the process above. The alternative to the process is to have a new key delivered to you. Or you could have a technician cut the tire down and get a new spare tire carrier. It would be much easier to use the wriggling process, considering the costs of these processes.

How Do You Get The Spare Tire Off A Chevy Silverado?

Chevrolet Trucks have a reliable build that makes them a favorite for people who love lugging things. Having some tips on getting the spare tire down comes in handy:

You will need tools to get the spare tire down. An ignition key and a jack kit without the jack is an excellent place to start. If you do not know what a jack kit is, look for a long pouch under the back bench seat. It comes with a crowbar and several rods. You can get these from many places if you do not have the kit.

The instructions are pretty straightforward. Start by accessing the back of the truck. As you do so, check for the existence of a spare tire. Doing so is quite easy, and it requires that you get down on one knee and look behind the bumper. You can press your nose against the monitor and from here, you should see tire grooves.

Once you acknowledge that indeed, you do have a tire, you can now stand. Proceed to the passenger side of the license plate, and behind the plastic cover, you should find a key opening. Now, use the ignition key in this space and turn to the right as you tug a little towards you. As you do this, the lock will come apart from the hole. You can now set the assembly at the back of the car. Start by opening the kit to get the rods and the crowbar. One of the rods should have a broader end as compared to the others.

Additionally, it should flare out on all sides. Set this female rod aside and attach it to another rod. This attachment will give you adequate room to reach the male side on the bumper. Now, connect the male and female parts and rotate the bar anti-clockwise. The spare tire should start descending to the ground. Continue until the tire reaches the ground, and then some more. That’s all, and you can now proceed to change the flat tire.

Leave a Comment